Here on the SketchUp team, we’re DIYers at heart -- we like solving design problems and building things. For a while now, we’ve had a big presence at Maker Faire. We go because we truly enjoy nerding out with fellow makers and dreaming up our own design-build projects. At World Maker Faire in New York last month, we decided to cook up a pair of large geodesic domes, because, well, why not?
Actually, the point of our exhibit -- besides being a practice run for a future Burning Man trip -- was to prove that SketchUp makes planning and building team DIY projects easier and more fun. We enlisted the help of our good pal Eric Schimelpfenig of sketchthis.net and set out to turn a pile of PVC pipe into two huge geodesic domes and some comfortable furniture.
Here’s how we pulled it off: After exploring geodesic designs on 3D Warehouse -- and a lot of discovery on Domerama -- we jumped into SketchUp for conceptual design. Satellite imagery for our site plan demonstrated that two twenty-foot diameter domes would fit perfectly, and a simple massing model proved that 3V ⅝ domes -- with their extra head room -- would provide plenty of height and floor space for people and furniture.
Once we knew the defining characteristics of our dome, we churned out the strut lengths using Domerama’s geodesic calculator and then advanced the design using Dynamic Components to create a fabricatable model. From there, we employed generate report and some spreadsheet magic to crank out a cut-list for our PVC stockpile from Home Depot.
As our fabrication captain, Eric got to turn our SketchUp model into a collection of ready-to-assemble parts. Using some simple jigs to speed up the cutting and drilling, he churned through 1,600 feet of pipe -- about a quarter-mile of PVC -- from his workshop in Massachusetts. Rounding out the list, he ordered up the awesome purpose-built connector hubs from Sonostar and grabbed a giant bag of nuts and bolts to keep things from sliding apart. With just two days to go before assembly, he loaded 152 connectors, 322 pipes, two ladders, and a dozen hammers into a van we’re pretty sure he had permission to borrow.
On-site at the New York Hall of Science, the pipe-laden van was met by a jet-lagged assembly crew of SketchUppers who’d only ever seen the geodomes in our working model. Over the course of a few hours, we assembled the two domes according to these hilarious yet exceedingly clear build instructions, courtesy of Eric and LayOut.
The next day, our team hammered together several pieces of SketchUp-designed PVC furniture (generously contributed by our friends at FORMUFIT), and fitted vinyl tarps to the roof. We had designed the tarps to be a modular shading system, so that we could leave some sections of the dome exposed or cover everything up in case of crummy weather.
To derive the tarps from our SketchUp model, we drew out some basic gore-like polygons over the dome component and then used the Flattery extension to derive their dimensions for printing. The tarps were manufactured with grommets that allowed us to join and secure them with zip ties.
Throughout the weekend, thousands of attendees -- attracted by the awesome sight of our booth and the promise of shade -- wandered through our domes, where they were pumped full of SketchUp knowledge and slapped with these bracelets before being sent, disoriented, but not sunburned, back into the Faire.
We introduced a lot of people to SketchUp and Buckminster Fuller (not bad company, right?) over the weekend, and now we have a pair of geodesic domes to keep us cool at the next team picnic.